|
Explore
MACHSTREAM 32
Continuous
Form Laser Printers, Stackers, & Consumables |
NEW PENTAX MACHSTREAM 32 continuous form laser printers
and stackers provide businesses with the print quality, capacity,
reliability, and versatility needed for production printing. |
Pentax
Machstream 32 600 dpi Continuous Form Laser Printer
Brochure
PDF | How
To Buy | Learn/FAQs | Stackers & Consumables | Service/Support | CE TRAINING
The MACHSTREAM 32 laser printer features 32 page-per-minute
speed, high toner capacity, user-serviceable components such
as the fuser assembly, longer life components, and a reversible
drive system to reduce forms waste.
High
speed, high resolution, use of fanfold media (3" to 33" length),
quick warm-up time, and quiet operation make it ideal for
both office and production environments. These printers are
designed for high reliability and ease-of-use.
Serviceability
is designed in to minimize cost and repair time. User maintenance
requirements are also minimal.
|
Printer
Shown With Stacker
 |
|
Machstream
32 Laser Printer Features:
- 32
pages-per-minute
- 600-dpi
addressability
- Prints
continuous fanfold paper or label stock up to 15"
wide
- Small
footprint
- Reversible
drive and leading edge self-alignment reduces forms
waste
- Straight-through
paper path
- 32,000-page
toner capacity
- Quiet
operation
- 400,000-page
OPC life
- User-removable
fuser for easy maintenance
- Universal
power supply
- Design
life of 5 years or 24 million pages
- Available
with standard or MICR toner
|
|
|
|
| There is a World of different continuous form media that you can print on with the PENTAX Machstream 32, a variable data monochrome continuous form laser printer. This printer does well not only with green bar and white form paper stock, but also with preprinted color forms that are finished by adding monochrome text specifics. Some examples are shown lower right. |
Machstream
32 Laser Printer Specifications:
- Speed: Up to 32 ppm in landscape mode; 25 PPM in portrait
mode; 4.58 ips; 1650 lpm @ 6 lpi; 3590 cps @17 cpi
- Media
Type:
- 16-42
lb continuous form media up to 15" wide
- Label
stock; card stock; tag stock
- Paper
Width: 6.5" to 15" pin-to-pin
- Print
Width: 13.6"
- Paper
Length: 3" to 33" in 1/8" or 1/6" increments
- Print
Method: Electrophotographic (diode laser), monochrome
- Photosensitive
Material: OPC (organic photoconductor)
- Printing
Addressability (Resolution): 600 x 600 dpi
- Fusing
Method: Heat and Pressure
- Warm-up: 3 minutes after power on, 15 seconds warm
- First
Print:
- <20
seconds from warm
- <30
seconds from standby
- Keypad/Display:
- 16x2
Alphanumeric LCD display
- Ready,
On-line, and Data Indicators
- 7
control push-button panel
- Electrical
Requirements: 100-120/220-240 VAC @50/60 Hz, 11.6A
@ 110 VAC
- Noise
Level: <55 dbA
- Operating
Environment:
- Temperature:
50-90º F (10-32º C)
- Humidity:
20-80% RH
- Dimensions: W 24" (609 mm), H 16.5" (419 mm), D 24" (609 mm)
- Weight: 134 LB (61kg)
- User-Serviceable
Items*:
- Toner
Capacity: 32,000 pages @ 4% coverage
- Waste
Toner Container @ 64,000 pages
- Felt
Wiper @ 64,000 pages
- OPC
Cartridge @ 400,000 pages
- Developer
Unit @ 800,000 pages
- *
Based on 20 LB bond fanfold paper - other media
may change these estimates.
- User-Replaceable
Unit:
- Monthly
Duty Cycle: 400,000 pages (8.5" x 11" landscape)
- Certifications:
- CISPR-22
Class B
- EN50082-1:1994
compliant
- FDA/CDRH
21CFR compliant
- IEC
825 compliant
- CSA
950/NRTL-C (US 1950)
- EN60950
(TUV)
- Service
Life:
- 5
years or 24,000,000 pages
- On-site
service available through national service providers
- Post-warranty
service contracts available
- Emulation: PCL5, Optional: IPDS; SCS
- Interfaces: Ethernet TCP/IP; IEEE-1284, Optional: Twinax; Coax;
RS-232
- Optional
Features: Pedestal, Passive Stacker; Power Stackers;
Cutter; MICR Toner
|
|
|
|
|
|
| Machstream
32 Stackers & Consumables |
| Machstream
32 Stackers |
|
|
Machstream
32 Stacker: The Machstream 32 Stacker is
a continuous form active stacking system; and stacks
fanfold paper and labels up to 15" in width and 9"
to 14" in length at speeds up to 32 forms per minute.
It has an integrated printer cabinet-pedestal, quiet
operation, and an automatic ON/OFF mode. Easy setup
and very low maintenance. The stacker is available
in both power and passive models: The power model
has motors that assists while stacking, while the
passive model relies on the energy of the falling
paper.
Options:
Electrical
Requirements: 115 VAC or 230 VAC (Line Voltage
110-120 / 50-60Hz VAC Line Voltage 230 VAC)
(Power Model)
|
|
|
Machstream
32 Full Power Stacker: The Machstream 32
Full Power Stacker is designed with convenience and
reliability in mind; and designed to stack even the
most difficult media. Easy setup and low maintenance.
|
|
| Machstream
32 Consumables: |
|
|
Toner
Kit: The toner waste bottle should be changed
every time a new toner cartridge is installed. A single
toner cartridge should print approximately 32,000 8
½ x 11 inch pages with 4% coverage.
Contents: 2 toner
cartridges, 2 waste toner bottles, 1 fuser cleaning
roller. |
|
|
OPC
Kit (Drum Kit): The OPC, cleaner station,
and main charger are all integrated into the OPC module.
The OPC module life is approximately 400,000 8 ½ inch
length pages (300,000 11 inch length pages).
Contents: 1 OPC
module and 1 wire cleaning brush. |
|
|
Developer
Unit: The developer unit life is approximately
800,000 8 ½ inch length pages (600,000 11 inch pages).
The developer mix is purchased separately in the Developer
Mix Kit.
Contents: 1 developer
unit. |
|
|
Developer
Mix Kit: The developer mix kit should normally
only be required when changing the developer.
Contents: 1 bag of
developer mix, 1 ozone filter, 1 cleaning kit, and 2 plastic
bags. |
|
|
Transfer
Charger Unit: The transfer charger unit life
is approximately 400,000 8 ½ inch length pages (300,000
11 inch length pages).
Contents: 1 transfer
charger unit. |
|
|
Fuser
Kit: The fuser unit life is approximately 800,000
8 ½ inch length pages (600,000 11 inch length pages).
Contents: 1 fuser
unit and 1 Exit Roller Assembly. |
|
|
For
production printer configuration and purchasing questions
please contact:
Peter
D'Carlo,
Laser Printer Product & OEM Sales Program Manager
Phone: 303-728-0288, Toll Free: 1-800-877-0155, then
press extension 1288.
Joe
Spahn,
North American Distribution Sales Manager
Phone: 303-460-1615, Toll Free: 1-800-877-0155, then
press extension 1615.
Email: Laserinfo@pentax.com
Or
use our webform,
Ask your question now! We'll get
back to you ASAP via phone or email during normal business
hours. |
|
|
|
|
